+48 576 425-292
High repetition rate Pockels cell drivers and accessories
MHz-class fast driver for pulse pickers, full bridge Pockels cell drivers for choosing single pulse from train of ultrashort pulses.
PP-KIT pulse picker developer kit, a set of devices easy-to-integrate into your system,
HVSW-03 or HVSW-04 Pockel cell drivers of MHz repetition rates.
Please, take into account also
• ultra fast (1-3 ns rise), ultra small (40×30 mm) kHz-range QBD-nano for cavity dumping
• ultra fast (1-3 ns rise and fall), small (80×50 mm), kHz-range, 0-800 ns duration QBU-nano for regenerative amplifier control
• ultra fast (3-4 ns rise and fall), small (80×50 mm), up to 10 kHz-range, 10-1000 ns duration QBY-4001 and QBY-4010 on GaN transistors, for regenerative amplifier control and pulse picking.
• ultra fast (3-4 ns rise and fall), up to 5 kHz-range, 10-1000 ns duration encased driver for laboratory QBY-BT on GaN transistors, for regenerative amplifier control and pulse picking.
High voltage high repetition rate Pockels cell driver:
- Output voltage up to 4000 V
- Repetition rate up to 4 MHz @ 1400 V and up to 1 MHz @ 3200 V
- Rise/fall time - 5-11 ns (depends on load capacitance)
- Requires external HV power supply
(e.g. HVPS-300) - Water cooling
Applications: pulse picking, cavity dumping, regenerative amplifier control
HVPS-300 high voltage power supply
HVPS-300 is a specialized high voltage power supply with bipolar output and DC input. Key features:
- bipolar output
- 24 V DC input
100-240 V AC in bench top version - output voltage - up to 4 kV (+/-2kV)
- high output power - up to 300 W
- output voltage accuracy - better than 0.5%
Typical use: powering megahertz-class Pockels cell drivers
High voltage high repetition rate Pockels cell driver:
- Output voltage up to 2000 V
- Repetition rate up to 1 MHz @ 1600 V
- Risetime/falltime - 5-8 ns (depends on load capacitance)
- Integrated high voltage power supply
- Basement conduction cooling
Applications: pulse picking, cavity dumping, regenerative amplifier control
PP-KIT electronics for pulse picker, developer kit
PP-KIT or Pulse picker developer kit is an electronical part of pulse picker, it includes:
- One PP-CONTROL synchronization board
- One or two HVSW-03 or HVSW-04 high repetition rate Pockel cell drivers
- PC software
- Auxiliary power supplies, interconnection cables etc.
PP-CONTROL synchronization board
Precisely synchronizes up to two Pockels cell drivers to the seed oscillator optical pulse train:
- 1x optical synchro input
- 1x electrical synchro input
- 2x independent synchro outputs
- over 1000 ns adjustable delay in each channel
- +/- 250 ps jitter
- USB, RS-485 interfaces